Flood Protection FAQs | Flood Barrier Pros
Get answers to common questions about flood barriers, installation, and protection in Florida.
Frequently Asked Questions
Typical repairs include gasket deterioration, bent frames from impact, and stripped clamps. Minor aluminum warps ≤2 mm can be straightened using press blocks. Heavier damage requires factory re-certification.
Yes. Remove gasket, clean track with isopropyl alcohol, insert new EPDM, and torque bolts evenly. Test with a 1-inch water column for 10 minutes. Reference resealing after storm.
Yes across SW Florida—Sarasota to Cape Coral. Repairs completed within 24 hours for emergency calls.
Powder-coated finishes can be refinished with polyester marine coating after light sanding. Do not exceed 250 °F bake temp to preserve gasket adhesion.
Immediately if threads are corroded or heads stripped. Always use 316 SS replacements. Mix-metal hardware voids corrosion warranty.
Perform hydrostatic test to 1.5× expected flood height. Document date and results for insurance submission.