Flood Protection FAQs | Flood Barrier Pros

High-grade aluminum flood panels rated to ASTM E330 withstand hydrostatic pressures typical of Category 3 surge zones. When anchored correctly, they prevent water intrusion up to 36 inches above threshold. For coastal Miami, we recommend sealing gaskets and stainless hardware to resist salt corrosion.

Learn more about our Home Flood Barriers – Miami installations.

Permanent track or anchor installations generally require a short-form permit under the 'flood protection device' category. Removable panels that use existing openings are exempt. We coordinate permitting with Miami-Dade's Building Code Section 3109 to ensure compliance.

Most residential systems install in one working day once openings are measured. Larger multi-opening properties may require 2–3 days. Each panel system is pre-cut and pressure-tested before delivery to minimize on-site time.

Rinse all components with fresh water, remove salt residue, and inspect gasket compression tracks. Store panels vertically in a dry area. Annual hardware checks maintain FEMA P-203 compliance.

Yes. Each 48-inch aluminum panel weighs roughly 14 lb. A single homeowner can secure a door or window bay in 3–5 minutes using quick-lock clamps supplied with the kit.

Most carriers recognize certified systems as mitigation devices and may discount wind-and-flood premiums 5–10%. Always submit the product's engineering certificate during policy renewal.

Panels provide sealed, reusable protection without introducing contaminated sand or mold risk. They deploy faster and store compactly.

Marine-grade aluminum panels typically last 20–25 years with annual gasket replacement every 5 years in salt-air environments.

Yes. Our rapid-response team can fit pre-engineered openings within 24–48 hours before forecasted events, subject to availability.

All systems are machined and pressure-tested in our U.S. facility in Fort Lauderdale under ISO 9001 quality control.